15015150026
Particle anti slip epoxy flooring

Particle anti slip epoxy flooring

 Details
Thickness0.5mm 1.0mm  2.0mm
Surface FinishGlossy, Matte, Anti-slip
Service LifeOver 5 years
Floor PerformanceFlat and seamless, wear-resistant and pressure-resistant, waterproof and oil-proof, with excellent impact resistance. It can withstand the driving of forklifts over 2~3 tons and heavy mechanical loads, and delivers superior anti-slip property.
Scope of ApplicationSuitable for all types of parking lots, as well as other floor surfaces with high wear frequency.
Construction Process
①Substrate TreatmentGrind, repair and remove dust according to the actual condition of the base surface.
②Epoxy PrimerApply 1 to 2 roller coats of high-permeability and high-adhesion epoxy primer to form an even and non-whitening surface, so as to enhance substrate strength and adhesion.
③Epoxy Mortar Intermediate CoatMix epoxy resin with appropriate quartz sand, apply one full even coat with a trowel to improve the floor's pressure resistance and impact resistance; or directly apply putty as required by design.
④Epoxy PuttyApply multiple coats as needed until the surface is flat and pore-free, without trowel marks and sanding marks.
⑤Epoxy TopcoatApply one roller coat of epoxy orange peel topcoat, or two roller coats of epoxy anti-slip matte topcoat, endowing the floor with anti-slip, dustproof, waterproof, wear-resistant, corrosion-resistant and easy-to-clean performance.
⑥Completion InstructionPedestrian access is allowed after 24 hours; heavy load traffic is permitted after 72 hours. (Standard temperature: 25℃; the open time shall be properly extended under low temperature. Keep the floor free of water during the curing period.) 
Technical Specifications
ItemIndex
Surface Drying Time (h)≤4
Hard Drying Time (h)≤24
Pot Life (h)Pass
Impact Resistance (1kg/100cm)No cracks or peeling on coating film
Adhesion (Cross-cut method, 1mm spacing, Grade)≤1
Pencil Hardness (Scratch Resistance)≥H
Wear Resistance (750g/500r), Weight Loss (g)≤0.03
Water Resistance (7d)No blistering or peeling; slight discoloration allowed, recoverable within 2h
Oil Resistance (120# Gasoline, 7d)No blistering or peeling; slight discoloration allowed
Alkali Resistance (20% NaOH, 72h)No blistering or peeling; slight discoloration allowed
Acid Resistance (10% H₂SO₄, 48h)No blistering or peeling; slight discoloration allowed
Salt Water Resistance (3% NaCl, 7d)No blistering or peeling; slight discoloration allowed
Anti-slip Performance (Friction Coefficient)≥0.5
Process Diagram
691ab9696d063.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service