15015150026
Sand anti slip epoxy flooring
[The previous one:Particle anti slip epoxy flooring]  [Next:最后一篇]

Sand anti slip epoxy flooring

 Details
Thickness2.0mm 3.0mm
Surface FinishGlossy type, matte type, anti-slip type
Service LifeMore than 5 years
Floor CharacteristicsFlat and seamless, wear and pressure resistant, waterproof and oil resistant, and high impact resistance. It can withstand the operation of forklifts over 2~3 tons and heavy mechanical loads, with excellent anti-slip performance.
Scope of ApplicationSuitable for all kinds of parking lots, as well as other floor surfaces subject to severe wear.
Construction Process
①Substrate TreatmentGrind, repair and remove dust according to the actual condition of the base surface.
②Epoxy PrimerRoll-coat 1 to 2 coats of epoxy primer with excellent permeability and adhesion to form an even and non-whitening surface, so as to enhance the strength and adhesion of the substrate.
③Epoxy Mortar Intermediate Coat Mix epoxy resin with an appropriate amount of quartz sand, apply one even coat with a trowel to improve the floor's pressure resistance and impact resistance; or apply putty directly as required by design.
④Quartz Sand SpreadingSpread 60~120 mesh quartz sand evenly over the floor in one layer.
⑤Epoxy TopcoatApply two roller coats of epoxy topcoat to endow the floor with anti-slip, dustproof, waterproof, wear-resistant and corrosion-resistant properties.
⑥Completion of ConstructionPedestrian access is allowed after 24 hours; heavy load access is permitted after 72 hours. (Based on 25℃ standard temperature; the opening time shall be appropriately extended at low temperature. Keep the floor free of water during the curing period.)
Technical Specifications
ItemIndex
Surface Drying Time (h)≤4
Hard Drying Time (h)≤24
Pot Life (h)Pass
Impact Resistance (1kg/100cm)No cracks or peeling on the coating
Adhesion (Cross-cut spacing 1mm, Grade)≤1
Pencil Hardness (Scratch Resistance)≥H
Wear Resistance (750g/500r), Weight Loss (g)≤0.03
Water Resistance (7d)No blistering or peeling; slight discoloration allowed, recoverable within 2h
Oil Resistance (120# Gasoline, 7d)No blistering or peeling; slight discoloration allowed
Alkali Resistance (20% NaOH, 72h)No blistering or peeling; slight discoloration allowed
Acid Resistance (10% H₂SO₄, 48h)No blistering or peeling; slight discoloration allowed
Salt Water Resistance (3% NaCl, 7d)No blistering or peeling; slight discoloration allowed
Anti-slip Performance (Friction Coefficient)≥0.7
Process Diagram
25.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service