15015150026
Silicon PU stadium floor
[The previous one:PU stadium floor]  [Next:Runway floor]

Silicon PU stadium floor

 Details
Thickness5.0mm 8.0mm
Surface FinishGlossy
Service LifeMore than 10 years
Floor PerformanceIt features outstanding weather resistance, wear resistance, water resistance and adhesion; available in various colors with anti-slip surface treatment. It offers excellent elasticity and weatherability, and is easy to clean, maintain and repair.
Scope of Application① Various sports venues such as ball courts, tennis courts, basketball courts and volleyball courts;
② Children’s playgrounds and kindergarten activity grounds;
③ Colorful pavement for pedestrian paths, residential communities, amusement parks and other similar areas.
Construction Process
①Waterproof LayerThe ground shall be constructed with qualified waterproofing treatment. Outdoor courts must be paved with an asphalt waterproof layer of no less than 5 cm thickness.
②Substrate TreatmentGrind, repair and remove dust according to the actual condition of the base surface.
③PU PrimerApply PU primer evenly on asphalt and cement concrete surfaces respectively. The asphalt base shall be cured for about 12 hours, while the cement base shall be cured for 1 to 2 hours after priming.
④PU Intermediate CoatAfter the primer is fully cured, apply one trowel coat of PU intermediate coat to improve the wear resistance of the floor.
⑤PU TopcoatRoll one coat of PU topcoat and two coats of silicon PU topcoat to endow the floor with dustproof, waterproof, wear-resistant and anti-corrosion properties as well as easy cleaning. The finished floor presents uniform color overall.
⑥Line MarkingMark standard court lines with 50 mm wide white and yellow PU paint.
⑦Completion & ApplicationThe court can be put into use 3 days after construction. (Standard temperature: 25℃; the opening time shall be properly extended under low temperature. Do not allow water contact during the curing period.)
During the entire construction period, stop construction immediately in case of rain, take timely protective measures and keep curing normally.
Technical Specifications
ItemIndex
Elongation at Break (%)≥90
Rebound Rate (%)≥20
Tensile Strength (MPa)≥0.7
Tensile Strength (MPa)≥25
Compression Recovery Rate (%)≤95
Hardness (Shore D)45~60
Flame Retardant Grade1
Process Diagram
18.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service