15015150026
PU stadium floor

PU stadium floor

 Details
Thickness5.0mm 8.0mm
Surface FinishGlossy type
Service LifeMore than 10 years
Floor CharacteristicsIt possesses extremely excellent weather resistance, wear resistance, water resistance and adhesion performance; available in multiple colors with anti-slip surface treatment. Featuring good elasticity and superior weatherability, it is easy to clean, maintain and repair.
Scope of Application① Sports venues such as courts, tennis courts, basketball courts, volleyball courts and other athletic facilities;
② Children’s playgrounds and kindergarten activity areas;
③ Color coating for pedestrian walkways, residential communities, amusement parks and other similar sites.
Construction Process
①Waterproof LayerThe ground shall be completed with waterproof treatment. Outdoor courts must be paved with asphalt waterproofing layer of no less than 5 cm thickness.
②Base Surface TreatmentGrind, repair and remove dust according to the actual condition of the substrate.
③PU PrimerApply PU primer evenly on asphalt or cement concrete surfaces respectively. The asphalt base shall be cured for about 12 hours; the cement base shall be cured for 1–2 hours after priming.
④PU Intermediate CoatAfter the primer is fully cured, trowel one coat of PU intermediate coat to improve the floor wear resistance.
⑤PU TopcoatApply one roller coat of PU topcoat and two roller coats of silicon PU topcoat. The finished floor is dustproof, waterproof, wear-resistant, corrosion-resistant and easy to clean with uniform color overall.
⑥Line MarkingMark court lines with standard 50 mm wide white and yellow PU paint.
⑦Completion of ConstructionThe venue can be put into use 3 days after construction. (Based on 25℃; the usable time shall be appropriately extended at low temperature. Keep the floor away from water during the curing period.)
Stop construction immediately in case of rainy weather during the whole construction process, take timely protective measures and continue curing.
Technical Specifications
ItemIndex
Elongation at Break (%)≥90
Rebound Value (%)≥20
Tensile Strength (MPa)≥0.7
Tensile Strength (MPa)≥25
Compression Recovery Rate (%) ≤95
Hardness (Shore Type D)45~60
Flame Retardancy (Grade)1
Process Diagram
18.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service