15015150026
Silicon PU stadium floor
[The previous one:PU stadium floor]  [Next:Runway floor]

Silicon PU stadium floor

 Details
Thickness5.0mm 8.0mm
Surface FinishGlossy
Service LifeOver 10 years
Floor PerformanceIt features outstanding weather resistance, abrasion resistance, water resistance and adhesion. Available in multiple colors with anti-slip surface treatment. It offers excellent elasticity, easy cleaning and maintenance, as well as convenient repair.
Scope of Application① Sports venues including courts, tennis courts, basketball courts, volleyball courts and other athletic grounds;
② Children’s playgrounds and kindergarten activity areas;
③ Color decorative paving for pedestrian paths, residential communities, amusement parks and similar sites.
Construction Process
①Waterproof LayerThe base shall be well waterproofed. For outdoor courts, asphalt waterproofing with a thickness of no less than 5 cm is required.
②Substrate TreatmentGrind, repair and dedust the base according to actual surface conditions.
③PU PrimerApply PU primer evenly onto asphalt or cement concrete surfaces respectively. Allow about 12 hours curing for asphalt substrate, and 1–2 hours curing for cement substrate after priming.
④PU Intermediate CoatAfter the primer is fully cured, apply one trowel coat of PU intermediate layer to improve floor abrasion resistance.
⑤PU TopcoatRoll one coat of PU topcoat and two coats of silicon PU topcoat to endow the floor with dustproof, waterproof, wear-resistant and corrosion-resistant properties and easy-clean performance. The finished surface presents uniform color.
⑥Line MarkingMark court lines with standard white and yellow PU paint at a width of 50 mm.
⑦Completion & UsageThe venue can be put into service 3 days after construction. (Based on 25 ℃; the waiting period shall be properly extended at low temperature. Keep the floor free of water during curing.)
During construction, stop work immediately in case of rain, take timely protective measures and maintain normal curing.
Technical Specifications
ItemIndex
Elongation at Break (%)≥90
Rebound Rate (%)≥20
Tensile Strength (MPa)≥0.7
Tensile Strength (MPa)≥25
Compression Recovery Rate (%)≤95
Hardness (Shore D)45~60
Flame Retardant Grade1
Process Diagram
18.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service