15015150026
Self leveling trowel type epoxy floor

Self leveling trowel type epoxy floor

 Details
Thickness1.0mm 2.0mm 3.0mm
Surface FinishGlossy type
Service Life1.0mm: 8 years; 2.0mm: 10 years; 3.0mm: 15 years
Floor CharacteristicsFlat and seamless, wear and pressure resistant, acid and alkali resistant, chemical resistant, various color options, easy to clean, durable, excellent impact resistance
Scope of Application① GMP pharmaceutical factories, hospitals, dust-free workshops;
② Electronic factories, instrument control rooms, food processing factories, cold storage rooms, freezer rooms.
Construction Process
①Waterproofing Treatment:Waterproofing construction shall be completed for the ground floor of the first floor.
②Base Surface Treatment:Repair, grind and remove dust according to the actual condition of the base surface.
③Epoxy Primer:Roll on 1 to 2 coats of epoxy primer with excellent permeability and adhesion. Keep the surface uniform without whitening to improve the strength and adhesion of the base surface.
④Epoxy Intermediate Coat:Mix epoxy resin with an appropriate amount of quartz sand, and apply evenly in several coats with a trowel.
⑤Epoxy Putty:Construct several coats as actual required, until the surface is flat without pores, trowel marks or grinding marks.
⑥Self-leveling Topcoat:Trowel one coat of self-leveling epoxy topcoat evenly. The finished floor is bright, clean and uniform in color as a whole.
⑦Completion of Construction:Pedestrian access is available after 24 hours, and heavy load traffic is allowed after 72 hours. (Based on ambient temperature of 25℃; the curing time shall be appropriately extended under low temperature. Keep the floor away from water during the maintenance period.)
Technical Specifications
ItemIndex
Surface Drying Time (h)≤6
Hard Drying Time (h)≤24
Pot Life (h)Pass
Hardness (Shore Hardness, Type D)≥80
Wear Resistance (750g/500r, g)≤0.030
Impact Resistance (1kg/200cm)No cracks or peeling on the coating
Water Resistance (7d)No blistering or peeling; slight discoloration allowed and recoverable within 2h
Oil Resistance (120# Gasoline, 7d)No blistering or peeling; slight discoloration allowed
Alkali Resistance (20% NaOH, 72h)No blistering or peeling; slight discoloration allowed
Acid Resistance (10% H₂SO₄, 48h)No blistering or peeling; slight discoloration allowed
Salt Water Resistance (3% NaCl, 7d)No blistering or peeling; slight discoloration allowed
Bonding Strength (MPa)≥3.0
Compressive Strength (MPa)≥80
Note: See Appendix 3 for anti-corrosion performance.
Process Diagram
3.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service