15015150026
Water based breathable epoxy flooring
[The previous one:第一篇]  [Next:Waterborne resin mortar waterproofing project]

Water based breathable epoxy flooring

 Details
Thickness0.5mm   1.0mm
Surface FinishGlossy type, Anti-slip type, Roller-coated type
Service Life0.5mm: More than 2 years; 1.0mm: More than 5 years
Floor PerformanceWater-based and environmentally friendly; construction available in humid conditions; soft luster and superior texture. It features excellent anti-corrosion, alkali-resistant and oil-resistant properties, as well as good air permeability.
Scope of Application① Underground parking lots, ground floors and construction under humid environments;
② Sites with heavy metal content restrictions;
③ Places with high environmental protection requirements.
Construction Process
①Base TreatmentGrind, repair and remove dust according to the actual condition of the base surface.
②Water-based Epoxy PrimerConstruction can be carried out as long as there is no standing water or obvious leakage. It improves base strength and enhances coating adhesion.
③Water-based Epoxy Intermediate CoatMix water-based epoxy resin with appropriate quartz sand, apply one even coat with a trowel to increase floor thickness and coating compressive strength.
④Water-based Epoxy PuttyApply 2 to 3 coats as required until the surface is flat without pores, trowel marks or grinding marks.
⑤Water-based Epoxy TopcoatRoll-coat two coats of flat water-based epoxy topcoat. The finished floor presents soft luster, clean surface and uniform color.
⑥Completion & CuringPedestrian access after 36 hours; heavy load access after 96 hours. (Standard temperature: 25℃. The curing time shall be properly extended at low temperature. Keep the floor away from water during maintenance.)
Technical Specifications
ItemIndex
Surface Drying Time (h)≤8
Hard Drying Time (h)≤48
Hardness (Pencil Hardness)≥H
Wear Resistance (750g/500r, Weight Loss, g)≤0.06
Impact Resistance (500g/100cm)No cracks and no peeling on coating
Adhesion (Cross-cut spacing 1mm, Grade)≤1
Water Resistance (168h)No blistering or peeling; slight discoloration allowed and recoverable within 2h
Oil Resistance (120# Gasoline, 72h)No blistering or peeling; slight discoloration allowed
Acid Resistance (10% H₂SO₄, 48h)No blistering or peeling; slight discoloration allowed
Alkali Resistance (20% NaOH, 72h)No blistering or peeling; slight discoloration allowed
Process Diagram
4.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service