15015150026
Colored sand type epoxy flooring
[The previous one:Self leveling trowel type epoxy floor]  [Next:最后一篇]

Colored sand type epoxy flooring

 Details
Thickness3.0mm 5.0mm
Surface FinishGlossy type, anti-slip type, roller-coated type, self-leveling type
Service LifeMore than 10 years
Floor FeaturesScratch & abrasion resistant, anti-slip, rich color options, heavy load bearing, wear resistant, impact resistant, elegant and attractive appearance.
Scope of Application① Food factories, oil and meat packing plants;
② High-end commercial premises.
Construction Process
①Waterproofing TreatmentWaterproofing work shall be completed for the ground floor.
②Base Surface TreatmentRepair, grind and dedust the base surface according to its actual condition.
③Epoxy PrimerRoll coat 1 to 2 layers of epoxy primer with excellent permeability and adhesion to form an even and non-whitening surface, so as to improve the strength and adhesion of the base.
④Color Sand Intermediate CoatMix epoxy resin with appropriate colored sand, pave one even layer with a trowel, then roll coat two layers of clear intermediate coat to enhance the structural strength of the color sand layer.
⑤Clear TopcoatApply two roller coats or one trowel coat of epoxy clear topcoat. The finished floor is bright, clean and uniform in color overall.
⑥Completion of ConstructionPedestrian access is allowed after 24 hours; heavy load traffic is permitted after 72 hours. (Based on ambient temperature of 25℃; the open time shall be appropriately extended under low temperature. Keep the floor free of water during the curing period.)
Technical Specifications
ItemIndex
Surface drying time (h)≤4
Hard drying time (h)≤24
Wear resistance (750g/500r, weight loss, g)≤0.03
Impact resistance (1kg/200cm)No cracks or peeling on coating
Water resistance (7d)No blistering or peeling; slight discoloration allowed and recoverable within 2h
Oil resistance (120# gasoline, 7d)No blistering or peeling; slight discoloration allowed
Acid resistance (20% H₂SO₄, 48h)No blistering or peeling; slight discoloration allowed
Alkali resistance (10% NaOH, 72h)No blistering or peeling; slight discoloration allowed
Salt water resistance (3% NaCl, 7d)No blistering or peeling; slight discoloration allowed
Bonding strength (MPa)≥3
Compressive strength (MPa)≥80
Process Diagram
5.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service