15015150026
Thin coated rolling surface epoxy flooring
[The previous one:第一篇]  [Next:Roll surface pressure resistant mortar epoxy floor]

Thin coated rolling surface epoxy flooring

 Details
Thickness0.3mm  0.5mm  0.7mm
Surface FinishGlossy, Matte, Anti-slip
Service Life0.3mm:2 years;0.5mm:More than 2 years;0.7mm:More than 3 years
Floor FeaturesSeamless & dustproof, wear-resistant & anti-slip, acid and alkali resistant, mildew-proof & waterproof, easy to clean, simple maintenance, bright appearance, various color options, convenient construction, cost-effective
Scope of Application①Garment factories, printing houses, toy factories, textile factories;
②Electronic factories, screen printing factories, paper product factories and other non-heavy-load areas;
③Warehouses, parking lots
Construction Process
①Waterproof Treatment:The ground of the first floor must be completed with waterproofing works in advance
②Base Surface Treatment:Repair, grind and remove dust according to the condition of the base surface.
③Epoxy Primer:Roll-coat 1 to 2 coats of high permeability and high adhesion epoxy primer to form an even surface without whitening, so as to enhance the strength and adhesion of the base surface.
④Epoxy Putty:Apply several coats as required until the surface is flat without holes, trowel marks or grinding marks.
⑤Epoxy Topcoat:Roll-coat 2 coats of solvent-based epoxy topcoat or anti-slip topcoat. The finished surface is bright, clean and uniform in color. An additional clear coat can be applied to extend the service life.
⑥Completion & Curing:Pedestrian access is allowed after 24 hours; heavy load bearing is permitted after 72 hours. (Based at 25℃; the curing time shall be appropriately prolonged under low temperature. Keep the floor free from water during the curing period.)
Technical Indicators
ItemIndex
Surface Drying Time (h)≤8
Hard Drying Time (h)≤48
Pot Life (h)Compliant
Impact Resistance (1kg/100cm)No crack or peeling on coating
Adhesion (Cross-cut spacing 1mm, Grade)≤1
Pencil Hardness (Scratch Resistance))≥H
Wear Resistance (750g/500r) /g≤0.03
Water Resistance (7d)No blistering or peeling; slight discoloration allowed, recoverable after 2 hours
Oil Resistance (120# Gasoline, 7d)No blistering or peeling; slight discoloration allowed
Alkali Resistance (20% NaOH, 72h)No blistering or peeling; slight discoloration allowed
Acid Resistance (10% H₂SO₄, 48h)No blistering or peeling; slight discoloration allowed
Salt Water Resistance (3% NaCl, 7d)No blistering or peeling; slight discoloration allowed
Process Diagram
691a815631af4.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service