Epoxy floor primer coating application delamination

Causes of occurrence; Improper selection of primer material

The bare ground is too smooth or has oil stains, wax, or other chemical substances

The cement layer is not dense and has not been waterproofed, resulting in rising water vapor or excessive moisture content on the base surface. The construction environment is too humid

Reason for handling:

For low strength base floors, high viscosity non agent primer materials should be used. For high strength base floors, such as high-density floors like Jinsha and terrazzo, high viscosity primer materials should be used A primer material with low viscosity and good permeability should be used

Grinding treatment and bare ground should be cleaned and kept clean

Construction using water-based resin mortar method, but its thickness should not be less than 2mm.

Epoxy flooring construction should be carried out at temperatures above 5 ℃ and humidity below 80%