15015150026
| Thickness | 1.0mm 2.0mm 3.0mm | ||||||||||||||||||
| Surface Finish | Self-leveling trowel finish, roller finish, glossy finish | ||||||||||||||||||
| Service Life | Over 10 years | ||||||||||||||||||
| Floor Characteristics | Reinforced with glass fiber for improved tensile strength; non-toxic, odorless, and excellent in resistance to acid, alkali and chemical solvents. | ||||||||||||||||||
| Scope of Application | ① General chemical storage tanks; | ||||||||||||||||||
| ② Crack-resistant flooring, pharmaceutical factories, power plants, non-ferrous metal factories; | |||||||||||||||||||
| ③ Premises with special anti-corrosion requirements. | |||||||||||||||||||
| Construction Process | |||||||||||||||||||
| ①Waterproofing Treatment | Waterproofing construction shall be completed for ground floors. | ||||||||||||||||||
| ②Base Treatment | Grind, repair and remove dust according to the condition of the substrate. | ||||||||||||||||||
| ③Epoxy Primer | Apply 1 to 2 roller coats of epoxy primer with high permeability and adhesion to enhance substrate strength and bonding force. | ||||||||||||||||||
| ④Anti-corrosion Epoxy Primer | Apply one roller coat of sealing anti-corrosion epoxy primer with strong adhesion to improve bonding between the base surface and glass fiber cloth. | ||||||||||||||||||
| ⑤Glass Fiber Cloth Laying | Lay the glass fiber cloth flat, adhere it to the floor with mixed epoxy intermediate coating, then level evenly with a trowel to ensure uniform coverage and improve floor toughness. Apply 1 to 3 layers as required. | ||||||||||||||||||
| ⑥Anti-corrosion Epoxy Intermediate Coat | Mix epoxy intermediate coating with appropriate quartz sand, and apply evenly 1 to 3 coats with a trowel. | ||||||||||||||||||
| ⑦Anti-corrosion Epoxy Putty | Apply 2 to 3 coats as required until the surface is flat and pore-free, suitable for subsequent topcoat application. | ||||||||||||||||||
| ⑧Anti-corrosion Epoxy Color Coat | Apply two roller coats of anti-corrosion epoxy color paint for uniform color appearance. | ||||||||||||||||||
| ⑨Anti-corrosion Epoxy Topcoat | Trowel one coat of anti-corrosion epoxy self-leveling topcoat, or apply two roller coats of anti-corrosion clear coat. The finished floor is bright, clean and uniform in color. | ||||||||||||||||||
| ⑩Completion & Curing | Pedestrian access permitted after 24 hours; heavy load access after 72 hours; put into official use after 7 days of curing. (Based on 25℃; opening time shall be properly extended at low temperature. Keep the floor free of water during curing.) | ||||||||||||||||||
| Technical Specifications | |||||||||||||||||||
| |||||||||||||||||||
| Process Diagram | |||||||||||||||||||
 | |||||||||||||||||||
Phone
15015150026
Douyin account
Douyin account
Video Channel
Video Channel
Top
