Construction of epoxy flooring for industrial plants

1. In terms of raw materials, solvent based epoxy single component primer or solvent-free epoxy primer (main paint: curing agent=5:1) is mixed and stirred evenly for industrial plant epoxy flooring;

2. In terms of construction, the epoxy floor of the factory building is evenly coated with rollers and brushes without any omissions.

3. Ingredient selection: Solvent based epoxy paint (1:1) or solvent-free epoxy paint (5:1) should be used for the factory floor, mixed in proportion, and then mixed with an appropriate amount of filler (such as quartz powder, talc powder) and stirred evenly;

4. Use a batch knife to cut 1-2 times on the factory floor, with a focus on filling any potholes or defects on the ground;

5. After the factory floor is cured, polish the defects such as knife marks and clean them with a vacuum cleaner, chicken feather duster, wrung out wet towel, etc.

6. Mix solvent based epoxy topcoat (1:1) or solvent-free epoxy topcoat (5:1) in proportion and stir evenly;

7. Dip the prepared roller into the topcoat and apply it evenly by rolling. The coating should be uniform without any omissions, and roll it twice.

8. The factory floor can be selected and used according to the user's needs in this process;

After 12-24 hours of completion of the factory floor construction, that is, after curing until there are no footprints left by pedestrians, apply a layer of epoxy wear-resistant layer topcoat by rolling, which can greatly improve the smoothness and durability of the floor.