15015150026
Your location:Home->Product
Particle anti slip epoxy flooring

Particle anti slip epoxy flooring

 Details
Thickness0.5mm 1.0mm  2.0mm
Surface TypeGlossy, Matte, Anti-slip
Service LifeMore than 5 years
Floor PerformanceFlat and seamless, wear-resistant and pressure-resistant, waterproof and oil-proof, with high impact resistance. It can bear the driving of forklifts over 2~3 tons and heavy mechanical loads, and features excellent anti-slip property.
Scope of ApplicationSuitable for all kinds of parking lots and other ground surfaces with severe wear.
Construction Process
①Base TreatmentGrind, repair and remove dust according to the actual condition of the base surface.
②Epoxy PrimerApply 1 to 2 coats of high permeability and high adhesion epoxy primer by roller, with uniform surface and no whitening, to improve the strength and adhesion of the substrate.
③Epoxy Mortar Intermediate CoatMix epoxy resin with appropriate quartz sand and apply one even coat with a trowel to enhance the floor’s pressure resistance and impact resistance; or directly apply putty as required by design.
④Epoxy PuttyApply several coats as needed until the surface is flat and pore-free, without trowel marks and sanding marks.
⑤Epoxy TopcoatApply one coat of epoxy orange peel topcoat by roller, or two coats of epoxy anti-slip matte topcoat by roller. The finished floor is anti-slip, dustproof, waterproof, wear-resistant, corrosion-resistant and easy to clean.
⑥Completion NotePedestrian access is allowed after 24 hours; heavy load access is permitted after 72 hours. (Reference temperature: 25℃; the open time shall be appropriately extended at low temperature. Keep the floor away from water during the curing period.) 
Technical Parameters
ItemIndex
Surface Drying Time (h)≤4
Hard Drying Time (h)≤24
Pot Life (h)Pass
Impact Resistance (1kg/100cm)No crack or peeling on coating
Adhesion (Cross-cut 1mm spacing, Grade)≤1
Pencil Hardness (Scratch Resistance)≥H
Wear Resistance (750g/500r) / g≤0.03
Water Resistance (7d)No blistering or peeling; slight discoloration allowed, recoverable within 2h
Oil Resistance (120# Gasoline, 7d)No blistering or peeling; slight discoloration allowed
Alkali Resistance (20% NaOH, 72h)No blistering or peeling; slight discoloration allowed
Acid Resistance (10% H₂SO₄, 48h)No blistering or peeling; slight discoloration allowed
Salt Water Resistance (3% NaCl, 7d)No blistering or peeling; slight discoloration allowed
Anti-slip Performance (Friction Coefficient)≥0.5
Process Diagram
691ab9696d063.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service