15015150026
Your location:Home->Product
Vibration free and anti slip ramp floor

Vibration free and anti slip ramp floor

 Details
Thickness3.0mm 5.0mm
Surface FinishGlossy type, matte type, anti-slip type
Service Life5–10 years
Floor CharacteristicsFlat and seamless, wear-resistant and pressure-resistant, waterproof and oil-proof, with excellent impact resistance. It can withstand the running of forklifts over 2~3 tons and heavy mechanical loads, and delivers superior anti-slip performance.
Scope of ApplicationSuitable for all kinds of parking lots, as well as other ground surfaces with heavy wear conditions.
Construction Process
①Base Surface TreatmentGrind, repair and remove dust according to the actual condition of the substrate.
②Epoxy PrimerRoll-coat 1 to 2 coats of epoxy primer with excellent permeability and adhesion to form an even, non-whitening surface, so as to improve substrate strength and bonding force.
③Epoxy Mortar Intermediate CoatMix epoxy resin with appropriate quartz sand, apply one even coat with a trowel to enhance the floor's pressure resistance and impact resistance.
④Quartz Sand SpreadingEvenly spread one layer of 16~26 mesh quartz sand on the floor surface.
⑤Epoxy TopcoatApply two roller coats of epoxy topcoat to make the floor dustproof, waterproof, wear-resistant, impact-resistant and easy to clean.
⑥Completion of ConstructionPedestrian access is allowed after 24 hours; heavy load access is permitted after 72 hours. (Based on 25℃; the accessible time shall be appropriately extended at low temperature. Keep the floor free of water during the curing period.) 
Technical Specifications
ItemIndex
Surface Drying Time (h)≤4
Hard Drying Time (h)≤24
Pot Life (h)Pass
Impact Resistance (1kg/100cm)No cracks or peeling on coating
Adhesion (Cross-cut spacing 1mm, Grade)≤1
Pencil Hardness (Scratch Resistance)≥H
Wear Resistance (750g/500r), Weight Loss (g)≤0.03
Water Resistance (7d)No blistering or peeling; slight discoloration allowed, recoverable within 2h
Oil Resistance (120# Gasoline, 7d)No blistering or peeling; slight discoloration allowed
Alkali Resistance (20% NaOH, 72h)No blistering or peeling; slight discoloration allowed
Acid Resistance (10% H₂SO₄, 48h)No blistering or peeling; slight discoloration allowed
Salt Water Resistance (3% NaCl, 7d)No blistering or peeling; slight discoloration allowed
Process Diagram
23.jpg


Contact Us—— Business covers major, medium and small cities across China as well as Southeast Asian countries.
Guangdong Jinfeng New Material Technology Co., Ltd.
Address: Room 1909, Building 5, Huixing Commercial Building, Shilong Town, Dongguan City, Guangdong ProvinceContact Person: Ms. Wang 15015150026Website: /Email:1841896008@qq.com
Taiwan Branch Office
Address:6th Floor, No. 23, Lane 17, Section 1, Touzhang Road, Toujia Village, Tanzi Township, Taichung City, Taiwan
Tel:00886-4-25326538
Fax:00886-4-25326538
Headquarters Production Base
Address: Zhuli Industrial Zone, Shiwan Town, Huizhou City, Guangdong Province (Jinfeng Company)
Tel: Ms. Wang 15015150026
  • Jinfeng Tiktok
  • WeChat Channels
Consulting service

Phone

Business Inquiry

15015150026

Douyin account

Douyin account

Video Channel

Video Channel

Top

Consulting service