Ground treatment plan for epoxy resin flooring

Epoxy resin flooring, with its excellent physical and mechanical resistance as well as outstanding chemical corrosion resistance, has gradually been constructed in common flooring construction. Overall, epoxy resin flooring has good wear resistance, strong resistance to mechanical collisions, and corrosion resistance. Its surface is bright and distinct, making it suitable for various factory workshops, warehouses, parking lots, laboratories, sports venues, and more. However, excellent products also have very strict requirements for processing, and every step needs to be constructed properly. Moreover, they must be used reasonably and appropriately to ensure the long-term use of the floor.

So, what are the aspects that need to be paid attention to in the construction and maintenance of the floor?

Firstly, the treatment of the natural environment:

1. Clear the accumulated water on the ground and keep it dry. The moisture content of the entire ground should not exceed 6%

2. Dust on natural surfaces should be thoroughly removed with a vacuum cleaner

3. The height of the entire surface should be consistent, with a permissible drop of 2-2.5mm

If the ground is a newly built cement floor, construction can only be carried out after the ground is completely dry, which usually takes about 28 days

5. The cement slurry and debris on the surface should be thoroughly removed, and it is important to note that any oil stains on the ground must be cleaned thoroughly. First, use detergent to absorb oil stains, and then thoroughly dry the water

Next is the use and maintenance of the ground

1. Try to change into clean rubber shoes when entering the epoxy floor. This can prevent the dust carried by the shoes from remaining on the floor and causing wear and tear to the floor

2. Try to use pulley style desks and chairs in the office to avoid scratching the ground caused by the dragging of tables and chairs

3. Forklifts and other equipment in the workshop have high rolling strength, so it is necessary to slow down and turn slowly at corners to avoid sudden braking and other phenomena that may cause wear on the floor

The most important thing for the floor in the laboratory is anti-corrosion. So if there is a chemical solution dripping on the floor, it should be cleaned up in a timely manner

Finally, the maintenance of the old floor

If the overall flatness and ground integrity of the old floor are relatively good, try to avoid high-intensity wear and timely clean up debris and dust on the ground; When encountering situations such as oil stains, mechanical methods can be used to remove them, but it is recommended to use solvent methods as much as possible to first adsorb the oil stains and then dry them; If the ground is damaged, it needs to be repaired appropriately, and if the damage is severe, a new layer of topcoat needs to be applied

Jinfeng has over 20 years of experience in floor research and construction, with a strong R&D team and an experienced practical construction team. Dongguan Jinfeng Coating Chemical Co., Ltd. specializes in undertaking various types of floor construction, as well as providing maintenance and renovation services for old floors. The company also sells various epoxy floor paints. Friends in need of epoxy can call 0769-88381655 for consultation