Floor suitable for large storage areas

Large storage area

The company has introduced advanced construction equipment and techniques from Germany, Japan, and adheres to the business philosophy of "maximizing customer value". It has successively launched products such as epoxy floor materials, epoxy resin floor paints, epoxy anti-static floor paints, diamond sand wear-resistant floor paints, cement self leveling floor paints, cement hardening additives, etc. Since its establishment, the company has contracted more than 10 million square meters of epoxy resin floor projects, nearly 8 million square meters of hardened wear-resistant series floors, and nearly 2 million square meters of self leveling series floors. The epoxy floor paints and hardened wear-resistant materials produced by the company have excellent properties such as wear resistance, heavy pressure resistance, dust prevention, waterproofing, anti-corrosion, anti-static, and strong adhesion. They are widely used in electronics factories, food factories, pharmaceutical factories, auto repair shops, garages, etc. Painting of the ground.

Scope of application

The ground of special places such as supermarkets, hallways, warehouses, car showrooms, car repair shops, and car parking lots;

Areas with high mechanical performance requirements, such as the floors of mechanical, electronic, electrical, instrumentation, pharmaceutical, textile, clothing, food, tobacco and other enterprise factories with certain impact.

performance characteristics

◇ Impact resistance, heavy pressure resistance, and excellent mechanical performance;

◇ Dustproof, mildew proof, wear-resistant, with good hardness;

After hardening, the shrinkage rate is small and there are no cracks;

◇ Resistant to general chemical corrosion such as water, oil, acid and alkali;

◇ Smooth and bright appearance, diverse colors;

Seamless, easy to clean and maintain.

Technical index test item index drying time, what? Surface dry (high), solid dry (high) ≤ 4 ≤ 24, adhesive strength ≥ 2, Shore hardness ≥ 80, impact resistance, kg

·50 cm in diameter, with wear resistance (750g/500r, weight loss, grams) ≤ 0.02, water resistance with no change in compressive strength after 48 hours, flexural strength with megapascal ≥ 70, tensile hardness with megapascal ≥ 6, megapascal ≥ 7, resistance to 30% saltwater without change for 12 days, resistance to 10% sulfuric acid without change for 56 days, resistance to 10% sodium hydroxide without change for 56 days, resistance to gasoline without change for 120 # 56 days. System characteristics

Solvent based, solid color, glossy or matte;

Thickness of 1-5mm;

The general service life is 8-10 years. The construction process name, specific methods, and requirements refer to the dosage of the primer layer 1. Mix solvent based epoxy single component primer or solvent-free epoxy primer (main paint: curing agent=5:1) and stir evenly; 2. Use a roller and brush to evenly apply without any omissions.

0.15 0.20 kg/m ² coated with 1 layer of mortar. Mix solvent based epoxy intermediate paint (1:1) or solvent-free epoxy intermediate paint (5:1) in proportion and add an appropriate amount of 40? Mix 100 mesh quartz sand evenly; 2. Use a batch knife to fully scrape 1? 2 times; 3. After curing, polish the defects such as knife marks and clean them thoroughly.

0.7 kg/m2/mm putty layer 1. Mix solvent based epoxy intermediate paint (1:1) or solvent-free epoxy intermediate paint (5:1) in proportion and add an appropriate amount of filler (such as quartz powder, talc powder) to stir evenly; 2. Using a batch knife to batch 1? 2 times, with a focus on filling the potholes and defects on the ground; 3. After curing, polish the defects such as knife marks, and clean them with a vacuum cleaner, chicken hair conditioner, wrung out wet towel, etc.

.

0.2-0.30 kg/m 2 surface coating 1. Mix solvent based epoxy topcoat (1:1) or solvent-free epoxy topcoat (5:1) in proportion and stir evenly; 2. Dip the prepared roller into the topcoat and apply it evenly by rolling. The coating should be uniform without any omissions, and roll it twice.

0.25-0.30 kg/m2 wear-resistant layer 1. This process can be selected and used according to user needs; 2. Has the solvent based epoxy topcoat been applied for 12 days? After 24 hours of curing until there are no footprints left by pedestrians, apply a layer of epoxy wear-resistant topcoat by rolling, which can greatly improve the smoothness and durability of the floor by 0.12 kg/m2. Construction profile warehouses, underground parking lots, mechanical manufacturing enterprise factories and other places require the ground to be free of sand and dust, and able to withstand the rolling of various vehicles (such as cars, forklifts, carts, etc.). Therefore, the floor of these places not only needs to have a general floor protection system, a flat and smooth decorative effect, but also needs to have strong wear resistance and pressure resistance. The epoxy resin flooring system is a high wear and pressure resistant flooring system made by combining epoxy compression resistant and wear-resistant mortar with epoxy topcoat. It is a professional flooring system that solves the ground protection problems of heavy machinery manufacturing enterprises' factories, industrial and commercial warehouses, underground parking lots, etc.