Thickness: 3.0mm

Surface morphology: shiny

Service life: Over 15 years

Floor characteristics: It has extremely high wear resistance, permanent corrosion resistance, impact resistance, and reduces dust.

Scope of application: Suitable for various parking lots, as well as floors with low dust resistance requirements.

construction technology

① Natural treatment: rough surfaces are created by sandblasting or polishing, cleaned thoroughly, and thoroughly wetted with water;

② Concrete leveling: using concrete with a strength of C25 or above, pouring cement mortar with a thickness of 30mm or more or fine aggregate concrete with a thickness of 50mm or more;  

③ Spraying gold and steel sand: First, evenly spread 2/3 of the hardener to allow the material to fully absorb the moisture in the concrete;

④ Mechanical smoothing: Then evenly spread the remaining 1/3 of the hardener and smooth it out. When the concrete is not damaged and has initially set, it should be smoothed and polished;  

⑤ Curing layer: Immediately apply a layer of curing layer after smoothing and finishing;

Process diagram