What are the basis for designing epoxy flooring?

What are the basis for designing epoxy flooring?

In order to quickly and accurately select suitable epoxy flooring materials and achieve optimal performance, safety, and economic efficiency in flooring design, we recommend that you consider the following factors:

mechanical properties

Wear resistance: What vehicles will walk on the floor during use;

Pressure resistance: How much load will the floor withstand during use;

Impact resistance: Will strong impact force cause the surface of the floor to peel off;

chemical properties

Acid and alkali resistance: analysis of various types and concentrations of corrosive chemical media during use;

Solvent resistance: Analyze according to the type of solvent and contact time during use.

Floor location status

Underground floor or ground floor;

Do you need to do moisture-proof treatment or choose a special moisture-proof floor.

Basal condition

Floor strength: generally requires compressive strength ≥ 25Mpa;

Flatness: Is it necessary to use epoxy mortar for repair.

Beautiful surface of the floor

Color: Color confirmation, whether color lines or zoning are needed;

Brightness: Choose bright or flat light;

Flatness: Is there a requirement for the leveling speed of the floor surface.

Fireproof flower and anti-static

There is a requirement for the floor in this situation.

financial budget

Choose the appropriate floor type and thickness based on the budget.

Safety requirements

If there are oil stains on the floor or slopes, anti slip flooring should be selected.

Inspection content before construction

Whether the maintenance of the new cement floor is qualified or not

New concrete usually needs to be cured for 28 days to ensure sufficient evaporation of moisture;

The concrete is completely solidified to achieve the required strength for the foundation layer.

Old flooring:

Whether the strength meets the conditions for laying epoxy flooring;

The original coating needs to be verified for compatibility with the floor to be constructed, in order to determine whether it should be applied directly or completely removed before construction can proceed. Damaged area

Before applying the primer, it is necessary to repair the flatness with epoxy mortar and fully consider its adhesion and strength.

Original ground expansion joints and grid joints