Maintenance and upkeep of epoxy flooring

Your epoxy floor paint is a high-value, high-quality, and high demand product, so it requires careful maintenance and upkeep. The correct usage method can keep the floor as new and extend its service life. Our company recommends the following:

1. After the completion of the flooring construction, a dedicated person must be responsible for the protection of the finished products;        

2. Strengthen education on product protection, quality and technical disclosure, and specific measures for product protection;        

3. After the completion of all indoor and outdoor landscaping projects, they should be cleaned up according to regulations, and finished products should be protected in a timely manner. It is not allowed to write, knock or scratch on the finished products;        

4. After the floor is laid, construction waste should be promptly removed and protective railings should be set up for protection until the finished product reaches the required strength before it can be removed; Protective measures against rain should be taken; It is not allowed to stack materials with sharp edges or materials that are prone to contaminating the ground on it;        

5. Before the equipment enters the factory, lay cardboard boxes on the floor to prevent scratching the ground during transportation;        

6. All personnel entering the workshop must change their shoes (to avoid bringing external mud and sand into the workshop and scratching the ground);        

7. All hardware, such as iron chairs, iron tables, iron shelves, etc., must have their feet wrapped in soft plastic or rubber to prevent scratching the ground during use;        

8. When dragging the pallet, it is necessary to fully lift it off the ground. When turning, please pay special attention to the corners of the pallet to avoid scratching the ground;        

9. Please use hard or elastic rubber wheels for carts and flatbed trucks, and use them separately inside and outside the factory building;        

10. When cleaning the floor, please use a soft mop or a dry wet dual-use vacuum cleaner. You can use clean water or neutral detergent to clean, but please note that the floor is slippery;        

11. If wear or scratches occur due to prolonged use, small areas can be repaired locally. If the area is large, it is recommended to re apply by rolling; And timely waxing and polishing treatment should be carried out