Jinfeng epoxy floor sealing primer

Jinfeng epoxy floor sealing primer:

Main components: This product is a two-component self drying coating composed of epoxy resin, additives, and solvents as component B, and a special epoxy curing agent as the other component.

Main characteristics: hard paint film; Excellent drying performance; High adhesion and excellent wear resistance.

Main application: Widely used as a sealing primer on cement floors and walls.

Technical specifications: Paint film appearance: The paint film is flat and smooth, colorless or light yellow

Drying time: Standard thickness single coating, 25 ℃, surface drying ≤ 6 hours, actual drying ≤ 24 hours

Pencil hardness: ≥ H

Adhesion: ≤ 1 (circle drawing method, grade)

Impact strength: 50kg · cm

Bending test: ≤ 1mm

30 day water resistance: no foaming

Alkali resistance (10% sodium hydroxide solution, 240H): no wrinkling, no foaming, no peeling

Packaging specifications: Paint: 18 kg/container, curing agent: 2.3 kg/container.

Proportion: Paint: H-1 curing agent=4:1 (weight ratio)

Construction time limit: 8h, (25 ℃)

Theoretical dosage: 150-250g/m2

Fully cured: 7 days

Suggested number of coating layers: apply two layers of sealing primer, 50 ± 5 μ m/layer

Matching paint: used as a sealing primer, combined with EH05-10 various colors of epoxy wear-resistant floor topcoat, for indoor and outdoor use.

Surface treatment: The paint base should be clean, free of all dirt such as oil stains and dust.

Coating method airless spraying: diluent: X-17 special diluent

Dilution rate: 0-15% (based on paint weight)

Nozzle diameter: approximately 0.4-0.5mm

Spray pressure: 15-20Mpa

Air spraying: diluent: X-17 special diluent

Dilution rate: 20-40% (based on paint weight)

Nozzle diameter: approximately 2. 0～2.5mm

Spray pressure: 0.3-0.5Mpa

Roll coating/brush coating: diluent: X-17 special diluent

Dilution rate: 0-20% (based on paint weight)

Storage period: Store in a cool, dry, and well ventilated place for one year for paint and six months for curing agent.

Precautions

1. Read the instructions before construction;

2. Before use, adjust the paint and curing agent according to the required ratio, mix as much as needed, stir evenly before use, and use up within 8 hours;

3. During the construction process, keep it dry and clean. After painting, the curing agent packaging bucket must be tightly covered to prevent gelation;

During construction and drying, the relative humidity should not exceed 85%. This product can only be delivered for use after 7 days of coating.

Before construction, the cement floor must be leveled and polished smooth with white cement putty, and only after 7 days can epoxy sealing primer be used.

Floor paint: epoxy wear-resistant floor paint (two-component), solvent-free self leveling floor paint (two-component), epoxy floor intermediate layer paint, epoxy floor sealing primer

Anti static epoxy floor paint, vinyl ester heavy-duty anti-corrosion floor paint, anti slip floor paint, acrylic floor paint, epoxy anti-static self leveling floor paint, epoxy colored sand floor paint, polyurethane wear-resistant floor paint

If you have any needs in this regard, please contact us in a timely manner, and we will provide you with the best service. Jinfeng Epoxy Flooring National Free Hotline: 400-856-1101 ext. 8902 Website: http://www.jinfengpaint.com/