Update floor paint process to solve the drawbacks of floor appearance

Jinfeng Epoxy Flooring Network News: Updating the construction technology of epoxy flooring is an inevitable trend in the development of modern flooring industry. What new processes will emerge for epoxy flooring this year?

There are two situations that require innovation in epoxy flooring: one is the epoxy floor paint coating for anti-corrosion flooring; Secondly, there is a need for floor updates.

Although the selection and construction of epoxy floor paint and floor innovation for new construction are fundamentally the same, their pace still differs. The first step in floor innovation is to eradicate the old floor and dispose of the underlying layer.

To remove the old coating, the first step is to investigate the aging condition of the floor and whether the new floor paint is compatible. If the aging level of the floor is severe, it can be soaked and washed with water, and then cleaned with a putty knife. The common use of mechanical methods to clean solvent based flooring, such as wire brushes or electric grinding wheels, is more suitable due to the dense appearance of solvent based flooring paint.

If there is a need to update the flooring due to company development reasons, the first consideration is the compatibility of the on-site floor paint. If the compatibility of the floor is good, only the exterior needs to be cleaned before floor coating. If the compatibility is poor, the old floor needs to be cleaned and reinstalled.

Epoxy anti-static floor paint has decorative and applicable properties, but after completion, it often presents coating defects such as bubbles, brush marks, hollowing, peeling, etc. These defects can be caused by improper construction, poor quality materials, or lack of protection during use. Here are a few ways to eliminate the external drawbacks of epoxy flooring that everyone can see:

1. Small area damage to the floor only requires partial disposal. If the damage area is large, it is necessary to completely reinstall the floor.

2. The construction temperature of epoxy floor paint should be between 15-20 ° C, and solvents should not be added randomly on the construction site.

3. For better compatibility of the coating, it is recommended not to store the allocated materials for a long time.

4. Strictly control the amount of curing agent and the temperature during construction.

5. Pay attention to ventilation at the construction site.

6. Reflect on the ratio and viscosity of pigments, fillers, and resins in epoxy floor paint coatings.

If you have any needs in this regard, please contact us in a timely manner, and we will provide you with the best service. Jinfeng Epoxy Flooring National Free Hotline: 400-856-1101 ext. 8902 Website: http://p.jinfengpaint.com